Foto Fusion- Read-me

Note to NT4 users

If you are running NT4 then you must have service pack 6 installed. This is included on the disk for you to install if you don’t have it already. To install service pack 6, please carry out the following instructions:

•	Click on the ‘Start’ menu on the taskbar.
•	Select ‘Run’ from the menu
In the dialogue box, type the name of your CD-ROM drive followed by a colon, backslash and then ‘redist\sp6i386.exe’. For example, if your CD-ROM drive is ‘D’ you would type ‘D:\redist\sp6i386.exe’.
•	Follow the on-screen instructions.

Alternatively, you could use Windows Explorer to find ‘sp6i386.exe’ on the disk. Double-click on it and follow the on-screen instructions.

You should do this before you install the main program.

Installation

The software should automatically run the installation program when you insert the disk into your CD drive, simply follow the on-screen instructions.

NOTE: if nothing happens when you place the CD in your drive, please carry out the following instructions:

•	Click on the ‘Start’ menu on the taskbar.
•	Select ‘Run’ from the menu
In the dialogue box, type the name of your CD-ROM drive followed by a colon, backslash and then ‘setup.exe’. For example, if your CD-ROM drive is ‘D’ you would type ‘D:\setup.exe’.
•	Follow the on-screen instructions.

Alternatively, you could use Windows Explorer to find setup.exe on the disk. Double-click on it and follow the on-screen instructions.

For optimum performance, it is recommended that you run your system on high colour (16 bit) at least, with a screen size of 800x600 pixels.

Using the images on the CD

Contained on the CD are 35 images. You can use these as ‘morph source’ or ‘target’. To access these photos from within Foto Fusion you must:

•	Select ‘File’
•	Choose ‘Source’ or ‘Target’
•	Use the explorer to find d:\target\. (where D:\ is the letter of your CD-ROM drive). Within this directory, you will find 35 images to use.
•	To view these images, click on ‘browse’. This will bring up a preview of all the pictures in the folder.  
•	Double click on any of these images to load them into Foto Fusion.

About greenstreet

For more information about greenstreet, refer to the file ‘greenstreet.htm’ on the root of the CD.

Troubleshooting

Some of the older graphics cards have been known to have problems with displaying individual frames of an imported video. 

If you notice that the slider bar will allow you to choose the frame but then fails to display a preview, please ensure that you are using the latest drivers for your graphics card. Check your manufacturers website for the latest updates.

If you are still experiencing problems, you could try disabling Direct Draw Acceleration for you graphics card. This can be done by running the dxdiag.exe program located on your machine.

Please note that this will also disable ‘Direct3D Acceleration’ which means that other applications using Direct3D may not function until Direct3D Acceleration is enabled once again.